Commit d86631c
Changed files (6)
home
.config
nvim
internal
extractor
home/.config/nvim/init.lua
@@ -1,97 +1,11 @@
---[[
-
-=====================================================================
-==================== READ THIS BEFORE CONTINUING ====================
-=====================================================================
-======== .-----. ========
-======== .----------------------. | === | ========
-======== |.-""""""""""""""""""-.| |-----| ========
-======== || || | === | ========
-======== || KICKSTART.NVIM || |-----| ========
-======== || || | === | ========
-======== || || |-----| ========
-======== ||:Tutor || |:::::| ========
-======== |'-..................-'| |____o| ========
-======== `"")----------------(""` ___________ ========
-======== /::::::::::| |::::::::::\ \ no mouse \ ========
-======== /:::========| |==hjkl==:::\ \ required \ ========
-======== '""""""""""""' '""""""""""""' '""""""""""' ========
-======== ========
-=====================================================================
-=====================================================================
-
-What is Kickstart?
-
- Kickstart.nvim is *not* a distribution.
-
- Kickstart.nvim is a starting point for your own configuration.
- The goal is that you can read every line of code, top-to-bottom, understand
- what your configuration is doing, and modify it to suit your needs.
-
- Once you've done that, you can start exploring, configuring and tinkering to
- make Neovim your own! That might mean leaving Kickstart just the way it is for a while
- or immediately breaking it into modular pieces. It's up to you!
-
- If you don't know anything about Lua, I recommend taking some time to read through
- a guide. One possible example which will only take 10-15 minutes:
- - https://learnxinyminutes.com/docs/lua/
-
- After understanding a bit more about Lua, you can use `:help lua-guide` as a
- reference for how Neovim integrates Lua.
- - :help lua-guide
- - (or HTML version): https://neovim.io/doc/user/lua-guide.html
-
-Kickstart Guide:
-
- TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.
-
- If you don't know what this means, type the following:
- - <escape key>
- - :
- - Tutor
- - <enter key>
-
- (If you already know the Neovim basics, you can skip this step.)
-
- Once you've completed that, you can continue working through **AND READING** the rest
- of the kickstart init.lua.
-
- Next, run AND READ `:help`.
- This will open up a help window with some basic information
- about reading, navigating and searching the builtin help documentation.
-
- This should be the first place you go to look when you're stuck or confused
- with something. It's one of my favorite Neovim features.
-
- MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
- which is very useful when you're not exactly sure of what you're looking for.
-
- I have left several `:help X` comments throughout the init.lua
- These are hints about where to find more information about the relevant settings,
- plugins or Neovim features used in Kickstart.
-
- NOTE: Look for lines like this
-
- Throughout the file. These are for you, the reader, to help you understand what is happening.
- Feel free to delete them once you know what you're doing, but they should serve as a guide
- for when you are first encountering a few different constructs in your Neovim config.
-
-If you experience any errors while trying to install kickstart, run `:checkhealth` for more info.
-
-I hope you enjoy your Neovim journey,
-- TJ
-
-P.S. You can delete this when you're done too. It's your config now! :)
---]]
-
-- Set <space> as the leader key
-- See `:help mapleader`
-- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
-vim.g.mapleader = ' '
-vim.g.maplocalleader = ' '
+vim.g.mapleader = " "
+vim.g.maplocalleader = " "
-- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
-- [[ Setting options ]]
-- See `:help vim.opt`
@@ -104,8 +18,8 @@ vim.opt.number = true
-- Experiment for yourself to see if you like it!
-- vim.opt.relativenumber = true
--- Enable mouse mode, can be useful for resizing splits for example!
-vim.opt.mouse = 'a'
+-- Disable mouse mode, not useful
+vim.opt.mouse = ""
-- Don't show the mode, since it's already in the status line
vim.opt.showmode = false
@@ -115,7 +29,7 @@ vim.opt.showmode = false
-- Remove this option if you want your OS clipboard to remain independent.
-- See `:help 'clipboard'`
vim.schedule(function()
- vim.opt.clipboard = 'unnamedplus'
+ vim.opt.clipboard = "unnamedplus"
end)
-- Enable break indent
@@ -129,12 +43,13 @@ vim.opt.ignorecase = true
vim.opt.smartcase = true
-- Keep signcolumn on by default
-vim.opt.signcolumn = 'yes'
+vim.opt.signcolumn = "yes"
-- Decrease update time
vim.opt.updatetime = 250
-- Decrease mapped sequence wait time
+-- Displays which-key popup sooner
vim.opt.timeoutlen = 300
-- Configure how new splits should be opened
@@ -145,10 +60,10 @@ vim.opt.splitbelow = true
-- See `:help 'list'`
-- and `:help 'listchars'`
vim.opt.list = true
-vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+vim.opt.listchars = { tab = " ", trail = "·", nbsp = "␣" }
-- Preview substitutions live, as you type!
-vim.opt.inccommand = 'split'
+vim.opt.inccommand = "split"
-- Show which line your cursor is on
vim.opt.cursorline = true
@@ -156,20 +71,15 @@ vim.opt.cursorline = true
-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 10
--- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
--- instead raise a dialog asking if you wish to save the current file(s)
--- See `:help 'confirm'`
-vim.opt.confirm = true
-
-- [[ Basic Keymaps ]]
-- See `:help vim.keymap.set()`
-- Clear highlights on search when pressing <Esc> in normal mode
-- See `:help hlsearch`
-vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+vim.keymap.set("n", "<Esc>", "<cmd>nohlsearch<CR>")
-- Diagnostic keymaps
-vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+vim.keymap.set("n", "<leader>q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" })
-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
@@ -177,7 +87,7 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
--
-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
-- or just use <C-\><C-n> to exit terminal mode
-vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+vim.keymap.set("t", "<Esc><Esc>", "<C-\\><C-n>", { desc = "Exit terminal mode" })
-- TIP: Disable arrow keys in normal mode
-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
@@ -189,16 +99,10 @@ vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' }
-- Use CTRL+<hjkl> to switch between windows
--
-- See `:help wincmd` for a list of all window commands
-vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
-vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
-vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
-vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
-
--- NOTE: Some terminals have coliding keymaps or are not able to send distinct keycodes
--- vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
--- vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
--- vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
--- vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })
+vim.keymap.set("n", "<C-h>", "<C-w><C-h>", { desc = "Move focus to the left window" })
+vim.keymap.set("n", "<C-l>", "<C-w><C-l>", { desc = "Move focus to the right window" })
+vim.keymap.set("n", "<C-j>", "<C-w><C-j>", { desc = "Move focus to the lower window" })
+vim.keymap.set("n", "<C-k>", "<C-w><C-k>", { desc = "Move focus to the upper window" })
-- [[ Basic Autocommands ]]
-- See `:help lua-guide-autocommands`
@@ -206,23 +110,23 @@ vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper win
-- Highlight when yanking (copying) text
-- Try it with `yap` in normal mode
-- See `:help vim.highlight.on_yank()`
-vim.api.nvim_create_autocmd('TextYankPost', {
- desc = 'Highlight when yanking (copying) text',
- group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
- callback = function()
- vim.highlight.on_yank()
- end,
+vim.api.nvim_create_autocmd("TextYankPost", {
+ desc = "Highlight when yanking (copying) text",
+ group = vim.api.nvim_create_augroup("kickstart-highlight-yank", { clear = true }),
+ callback = function()
+ vim.highlight.on_yank()
+ end,
})
-- [[ Install `lazy.nvim` plugin manager ]]
-- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
-local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
if not (vim.uv or vim.loop).fs_stat(lazypath) then
- local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
- local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
- if vim.v.shell_error ~= 0 then
- error('Error cloning lazy.nvim:\n' .. out)
- end
+ local lazyrepo = "https://github.com/folke/lazy.nvim.git"
+ local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
+ if vim.v.shell_error ~= 0 then
+ error("Error cloning lazy.nvim:\n" .. out)
+ end
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)
@@ -237,796 +141,753 @@ vim.opt.rtp:prepend(lazypath)
-- :Lazy update
--
-- NOTE: Here is where you install your plugins.
-require('lazy').setup({
- -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
- 'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
-
- -- NOTE: Plugins can also be added by using a table,
- -- with the first argument being the link and the following
- -- keys can be used to configure plugin behavior/loading/etc.
- --
- -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded.
- --
-
- -- Alternatively, use `config = function() ... end` for full control over the configuration.
- -- If you prefer to call `setup` explicitly, use:
- -- {
- -- 'lewis6991/gitsigns.nvim',
- -- config = function()
- -- require('gitsigns').setup({
- -- -- Your gitsigns configuration here
- -- })
- -- end,
- -- }
- --
- -- Here is a more advanced example where we pass configuration
- -- options to `gitsigns.nvim`.
- --
- -- See `:help gitsigns` to understand what the configuration keys do
- { -- Adds git related signs to the gutter, as well as utilities for managing changes
- 'lewis6991/gitsigns.nvim',
- opts = {
- signs = {
- add = { text = '+' },
- change = { text = '~' },
- delete = { text = '_' },
- topdelete = { text = '‾' },
- changedelete = { text = '~' },
- },
- },
- },
-
- -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
- --
- -- This is often very useful to both group configuration, as well as handle
- -- lazy loading plugins that don't need to be loaded immediately at startup.
- --
- -- For example, in the following configuration, we use:
- -- event = 'VimEnter'
- --
- -- which loads which-key before all the UI elements are loaded. Events can be
- -- normal autocommands events (`:help autocmd-events`).
- --
- -- Then, because we use the `opts` key (recommended), the configuration runs
- -- after the plugin has been loaded as `require(MODULE).setup(opts)`.
-
- { -- Useful plugin to show you pending keybinds.
- 'folke/which-key.nvim',
- event = 'VimEnter', -- Sets the loading event to 'VimEnter'
- opts = {
- -- delay between pressing a key and opening which-key (milliseconds)
- -- this setting is independent of vim.opt.timeoutlen
- delay = 0,
- icons = {
- -- set icon mappings to true if you have a Nerd Font
- mappings = vim.g.have_nerd_font,
- -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
- -- default which-key.nvim defined Nerd Font icons, otherwise define a string table
- keys = vim.g.have_nerd_font and {} or {
- Up = '<Up> ',
- Down = '<Down> ',
- Left = '<Left> ',
- Right = '<Right> ',
- C = '<C-…> ',
- M = '<M-…> ',
- D = '<D-…> ',
- S = '<S-…> ',
- CR = '<CR> ',
- Esc = '<Esc> ',
- ScrollWheelDown = '<ScrollWheelDown> ',
- ScrollWheelUp = '<ScrollWheelUp> ',
- NL = '<NL> ',
- BS = '<BS> ',
- Space = '<Space> ',
- Tab = '<Tab> ',
- F1 = '<F1>',
- F2 = '<F2>',
- F3 = '<F3>',
- F4 = '<F4>',
- F5 = '<F5>',
- F6 = '<F6>',
- F7 = '<F7>',
- F8 = '<F8>',
- F9 = '<F9>',
- F10 = '<F10>',
- F11 = '<F11>',
- F12 = '<F12>',
- },
- },
-
- -- Document existing key chains
- spec = {
- { '<leader>c', group = '[C]ode', mode = { 'n', 'x' } },
- { '<leader>d', group = '[D]ocument' },
- { '<leader>r', group = '[R]ename' },
- { '<leader>s', group = '[S]earch' },
- { '<leader>w', group = '[W]orkspace' },
- { '<leader>t', group = '[T]oggle' },
- { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
- },
- },
- },
-
- -- NOTE: Plugins can specify dependencies.
- --
- -- The dependencies are proper plugin specifications as well - anything
- -- you do for a plugin at the top level, you can do for a dependency.
- --
- -- Use the `dependencies` key to specify the dependencies of a particular plugin
-
- { -- Fuzzy Finder (files, lsp, etc)
- 'nvim-telescope/telescope.nvim',
- event = 'VimEnter',
- branch = '0.1.x',
- dependencies = {
- 'nvim-lua/plenary.nvim',
- { -- If encountering errors, see telescope-fzf-native README for installation instructions
- 'nvim-telescope/telescope-fzf-native.nvim',
-
- -- `build` is used to run some command when the plugin is installed/updated.
- -- This is only run then, not every time Neovim starts up.
- build = 'make',
-
- -- `cond` is a condition used to determine whether this plugin should be
- -- installed and loaded.
- cond = function()
- return vim.fn.executable 'make' == 1
- end,
- },
- { 'nvim-telescope/telescope-ui-select.nvim' },
-
- -- Useful for getting pretty icons, but requires a Nerd Font.
- { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
- },
- config = function()
- -- Telescope is a fuzzy finder that comes with a lot of different things that
- -- it can fuzzy find! It's more than just a "file finder", it can search
- -- many different aspects of Neovim, your workspace, LSP, and more!
- --
- -- The easiest way to use Telescope, is to start by doing something like:
- -- :Telescope help_tags
- --
- -- After running this command, a window will open up and you're able to
- -- type in the prompt window. You'll see a list of `help_tags` options and
- -- a corresponding preview of the help.
- --
- -- Two important keymaps to use while in Telescope are:
- -- - Insert mode: <c-/>
- -- - Normal mode: ?
- --
- -- This opens a window that shows you all of the keymaps for the current
- -- Telescope picker. This is really useful to discover what Telescope can
- -- do as well as how to actually do it!
-
- -- [[ Configure Telescope ]]
- -- See `:help telescope` and `:help telescope.setup()`
- require('telescope').setup {
- -- You can put your default mappings / updates / etc. in here
- -- All the info you're looking for is in `:help telescope.setup()`
- --
- -- defaults = {
- -- mappings = {
- -- i = { ['<c-enter>'] = 'to_fuzzy_refine' },
- -- },
- -- },
- -- pickers = {}
- extensions = {
- ['ui-select'] = {
- require('telescope.themes').get_dropdown(),
- },
- },
- }
-
- -- Enable Telescope extensions if they are installed
- pcall(require('telescope').load_extension, 'fzf')
- pcall(require('telescope').load_extension, 'ui-select')
-
- -- See `:help telescope.builtin`
- local builtin = require 'telescope.builtin'
- vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
- vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
- vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
- vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
- vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
- vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
- vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
- vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
- vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
- vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
-
- -- Slightly advanced example of overriding default behavior and theme
- vim.keymap.set('n', '<leader>/', function()
- -- You can pass additional configuration to Telescope to change the theme, layout, etc.
- builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
- winblend = 10,
- previewer = false,
- })
- end, { desc = '[/] Fuzzily search in current buffer' })
-
- -- It's also possible to pass additional configuration options.
- -- See `:help telescope.builtin.live_grep()` for information about particular keys
- vim.keymap.set('n', '<leader>s/', function()
- builtin.live_grep {
- grep_open_files = true,
- prompt_title = 'Live Grep in Open Files',
- }
- end, { desc = '[S]earch [/] in Open Files' })
-
- -- Shortcut for searching your Neovim configuration files
- vim.keymap.set('n', '<leader>sn', function()
- builtin.find_files { cwd = vim.fn.stdpath 'config' }
- end, { desc = '[S]earch [N]eovim files' })
- end,
- },
-
- -- LSP Plugins
- {
- -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
- -- used for completion, annotations and signatures of Neovim apis
- 'folke/lazydev.nvim',
- ft = 'lua',
- opts = {
- library = {
- -- Load luvit types when the `vim.uv` word is found
- { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
- },
- },
- },
- {
- -- Main LSP Configuration
- 'neovim/nvim-lspconfig',
- dependencies = {
- -- Automatically install LSPs and related tools to stdpath for Neovim
- -- Mason must be loaded before its dependents so we need to set it up here.
- -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
- { 'williamboman/mason.nvim', opts = {} },
- 'williamboman/mason-lspconfig.nvim',
- 'WhoIsSethDaniel/mason-tool-installer.nvim',
-
- -- Useful status updates for LSP.
- { 'j-hui/fidget.nvim', opts = {} },
-
- -- Allows extra capabilities provided by nvim-cmp
- 'hrsh7th/cmp-nvim-lsp',
- },
- config = function()
- -- Brief aside: **What is LSP?**
- --
- -- LSP is an initialism you've probably heard, but might not understand what it is.
- --
- -- LSP stands for Language Server Protocol. It's a protocol that helps editors
- -- and language tooling communicate in a standardized fashion.
- --
- -- In general, you have a "server" which is some tool built to understand a particular
- -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers
- -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
- -- processes that communicate with some "client" - in this case, Neovim!
- --
- -- LSP provides Neovim with features like:
- -- - Go to definition
- -- - Find references
- -- - Autocompletion
- -- - Symbol Search
- -- - and more!
- --
- -- Thus, Language Servers are external tools that must be installed separately from
- -- Neovim. This is where `mason` and related plugins come into play.
- --
- -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
- -- and elegantly composed help section, `:help lsp-vs-treesitter`
-
- -- This function gets run when an LSP attaches to a particular buffer.
- -- That is to say, every time a new file is opened that is associated with
- -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
- -- function will be executed to configure the current buffer
- vim.api.nvim_create_autocmd('LspAttach', {
- group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
- callback = function(event)
- -- NOTE: Remember that Lua is a real programming language, and as such it is possible
- -- to define small helper and utility functions so you don't have to repeat yourself.
- --
- -- In this case, we create a function that lets us more easily define mappings specific
- -- for LSP related items. It sets the mode, buffer and description for us each time.
- local map = function(keys, func, desc, mode)
- mode = mode or 'n'
- vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
- end
-
- -- Jump to the definition of the word under your cursor.
- -- This is where a variable was first declared, or where a function is defined, etc.
- -- To jump back, press <C-t>.
- map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
-
- -- Find references for the word under your cursor.
- map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
-
- -- Jump to the implementation of the word under your cursor.
- -- Useful when your language has ways of declaring types without an actual implementation.
- map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
-
- -- Jump to the type of the word under your cursor.
- -- Useful when you're not sure what type a variable is and you want to see
- -- the definition of its *type*, not where it was *defined*.
- map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
-
- -- Fuzzy find all the symbols in your current document.
- -- Symbols are things like variables, functions, types, etc.
- map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
-
- -- Fuzzy find all the symbols in your current workspace.
- -- Similar to document symbols, except searches over your entire project.
- map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
-
- -- Rename the variable under your cursor.
- -- Most Language Servers support renaming across files, etc.
- map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
-
- -- Execute a code action, usually your cursor needs to be on top of an error
- -- or a suggestion from your LSP for this to activate.
- map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction', { 'n', 'x' })
-
- -- WARN: This is not Goto Definition, this is Goto Declaration.
- -- For example, in C this would take you to the header.
- map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
-
- -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10)
- ---@param client vim.lsp.Client
- ---@param method vim.lsp.protocol.Method
- ---@param bufnr? integer some lsp support methods only in specific files
- ---@return boolean
- local function client_supports_method(client, method, bufnr)
- if vim.fn.has 'nvim-0.11' == 1 then
- return client:supports_method(method, bufnr)
- else
- return client.supports_method(method, { bufnr = bufnr })
- end
- end
-
- -- The following two autocommands are used to highlight references of the
- -- word under your cursor when your cursor rests there for a little while.
- -- See `:help CursorHold` for information about when this is executed
- --
- -- When you move your cursor, the highlights will be cleared (the second autocommand).
- local client = vim.lsp.get_client_by_id(event.data.client_id)
- if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then
- local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
- vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
- buffer = event.buf,
- group = highlight_augroup,
- callback = vim.lsp.buf.document_highlight,
- })
-
- vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
- buffer = event.buf,
- group = highlight_augroup,
- callback = vim.lsp.buf.clear_references,
- })
-
- vim.api.nvim_create_autocmd('LspDetach', {
- group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
- callback = function(event2)
- vim.lsp.buf.clear_references()
- vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
- end,
- })
- end
-
- -- The following code creates a keymap to toggle inlay hints in your
- -- code, if the language server you are using supports them
- --
- -- This may be unwanted, since they displace some of your code
- if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then
- map('<leader>th', function()
- vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
- end, '[T]oggle Inlay [H]ints')
- end
- end,
- })
-
- -- Diagnostic Config
- -- See :help vim.diagnostic.Opts
- vim.diagnostic.config {
- severity_sort = true,
- float = { border = 'rounded', source = 'if_many' },
- underline = { severity = vim.diagnostic.severity.ERROR },
- signs = vim.g.have_nerd_font and {
- text = {
- [vim.diagnostic.severity.ERROR] = ' ',
- [vim.diagnostic.severity.WARN] = ' ',
- [vim.diagnostic.severity.INFO] = ' ',
- [vim.diagnostic.severity.HINT] = ' ',
- },
- } or {},
- virtual_text = {
- source = 'if_many',
- spacing = 2,
- format = function(diagnostic)
- local diagnostic_message = {
- [vim.diagnostic.severity.ERROR] = diagnostic.message,
- [vim.diagnostic.severity.WARN] = diagnostic.message,
- [vim.diagnostic.severity.INFO] = diagnostic.message,
- [vim.diagnostic.severity.HINT] = diagnostic.message,
- }
- return diagnostic_message[diagnostic.severity]
- end,
- },
- }
-
- -- LSP servers and clients are able to communicate to each other what features they support.
- -- By default, Neovim doesn't support everything that is in the LSP specification.
- -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
- -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
- local capabilities = vim.lsp.protocol.make_client_capabilities()
- capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
-
- -- Enable the following language servers
- -- Feel free to add/remove any LSPs that you want here. They will automatically be installed.
- --
- -- Add any additional override configuration in the following tables. Available keys are:
- -- - cmd (table): Override the default command used to start the server
- -- - filetypes (table): Override the default list of associated filetypes for the server
- -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
- -- - settings (table): Override the default settings passed when initializing the server.
- -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
- local servers = {
- -- clangd = {},
- gopls = {},
- -- pyright = {},
- -- rust_analyzer = {},
- -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
- --
- -- Some languages (like typescript) have entire language plugins that can be useful:
- -- https://github.com/pmizio/typescript-tools.nvim
- --
- -- But for many setups, the LSP (`ts_ls`) will work just fine
- -- ts_ls = {},
- --
-
- lua_ls = {
- -- cmd = { ... },
- -- filetypes = { ... },
- -- capabilities = {},
- settings = {
- Lua = {
- completion = {
- callSnippet = 'Replace',
- },
- -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
- -- diagnostics = { disable = { 'missing-fields' } },
- },
- },
- },
- }
-
- -- Ensure the servers and tools above are installed
- --
- -- To check the current status of installed tools and/or manually install
- -- other tools, you can run
- -- :Mason
- --
- -- You can press `g?` for help in this menu.
- --
- -- `mason` had to be setup earlier: to configure its options see the
- -- `dependencies` table for `nvim-lspconfig` above.
- --
- -- You can add other tools here that you want Mason to install
- -- for you, so that they are available from within Neovim.
- local ensure_installed = vim.tbl_keys(servers or {})
- vim.list_extend(ensure_installed, {
- 'stylua', -- Used to format Lua code
- })
- require('mason-tool-installer').setup { ensure_installed = ensure_installed }
-
- require('mason-lspconfig').setup {
- ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer)
- automatic_installation = false,
- handlers = {
- function(server_name)
- local server = servers[server_name] or {}
- -- This handles overriding only values explicitly passed
- -- by the server configuration above. Useful when disabling
- -- certain features of an LSP (for example, turning off formatting for ts_ls)
- server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
- require('lspconfig')[server_name].setup(server)
- end,
- },
- }
- end,
- },
-
- { -- Autoformat
- 'stevearc/conform.nvim',
- event = { 'BufWritePre' },
- cmd = { 'ConformInfo' },
- keys = {
- {
- '<leader>f',
- function()
- require('conform').format { async = true, lsp_format = 'fallback' }
- end,
- mode = '',
- desc = '[F]ormat buffer',
- },
- },
- opts = {
- notify_on_error = false,
- format_on_save = function(bufnr)
- -- Disable "format_on_save lsp_fallback" for languages that don't
- -- have a well standardized coding style. You can add additional
- -- languages here or re-enable it for the disabled ones.
- local disable_filetypes = { c = true, cpp = true }
- if disable_filetypes[vim.bo[bufnr].filetype] then
- return nil
- else
- return {
- timeout_ms = 500,
- lsp_format = 'fallback',
- }
- end
- end,
- formatters_by_ft = {
- lua = { 'stylua' },
- -- Conform can also run multiple formatters sequentially
- -- python = { "isort", "black" },
- --
- -- You can use 'stop_after_first' to run the first available formatter from the list
- -- javascript = { "prettierd", "prettier", stop_after_first = true },
- },
- },
- },
-
- { -- Autocompletion
- 'hrsh7th/nvim-cmp',
- event = 'InsertEnter',
- dependencies = {
- -- Snippet Engine & its associated nvim-cmp source
- {
- 'L3MON4D3/LuaSnip',
- build = (function()
- -- Build Step is needed for regex support in snippets.
- -- This step is not supported in many windows environments.
- -- Remove the below condition to re-enable on windows.
- if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
- return
- end
- return 'make install_jsregexp'
- end)(),
- dependencies = {
- -- `friendly-snippets` contains a variety of premade snippets.
- -- See the README about individual language/framework/plugin snippets:
- -- https://github.com/rafamadriz/friendly-snippets
- -- {
- -- 'rafamadriz/friendly-snippets',
- -- config = function()
- -- require('luasnip.loaders.from_vscode').lazy_load()
- -- end,
- -- },
- },
- },
- 'saadparwaiz1/cmp_luasnip',
-
- -- Adds other completion capabilities.
- -- nvim-cmp does not ship with all sources by default. They are split
- -- into multiple repos for maintenance purposes.
- 'hrsh7th/cmp-nvim-lsp',
- 'hrsh7th/cmp-path',
- 'hrsh7th/cmp-nvim-lsp-signature-help',
- },
- config = function()
- -- See `:help cmp`
- local cmp = require 'cmp'
- local luasnip = require 'luasnip'
- luasnip.config.setup {}
-
- cmp.setup {
- snippet = {
- expand = function(args)
- luasnip.lsp_expand(args.body)
- end,
- },
- completion = { completeopt = 'menu,menuone,noinsert' },
-
- -- For an understanding of why these mappings were
- -- chosen, you will need to read `:help ins-completion`
- --
- -- No, but seriously. Please read `:help ins-completion`, it is really good!
- mapping = cmp.mapping.preset.insert {
- -- Select the [n]ext item
- ['<C-n>'] = cmp.mapping.select_next_item(),
- -- Select the [p]revious item
- ['<C-p>'] = cmp.mapping.select_prev_item(),
-
- -- Scroll the documentation window [b]ack / [f]orward
- ['<C-b>'] = cmp.mapping.scroll_docs(-4),
- ['<C-f>'] = cmp.mapping.scroll_docs(4),
-
- -- Accept ([y]es) the completion.
- -- This will auto-import if your LSP supports it.
- -- This will expand snippets if the LSP sent a snippet.
- ['<C-y>'] = cmp.mapping.confirm { select = true },
-
- -- If you prefer more traditional completion keymaps,
- -- you can uncomment the following lines
- --['<CR>'] = cmp.mapping.confirm { select = true },
- --['<Tab>'] = cmp.mapping.select_next_item(),
- --['<S-Tab>'] = cmp.mapping.select_prev_item(),
-
- -- Manually trigger a completion from nvim-cmp.
- -- Generally you don't need this, because nvim-cmp will display
- -- completions whenever it has completion options available.
- ['<C-Space>'] = cmp.mapping.complete {},
-
- -- Think of <c-l> as moving to the right of your snippet expansion.
- -- So if you have a snippet that's like:
- -- function $name($args)
- -- $body
- -- end
- --
- -- <c-l> will move you to the right of each of the expansion locations.
- -- <c-h> is similar, except moving you backwards.
- ['<C-l>'] = cmp.mapping(function()
- if luasnip.expand_or_locally_jumpable() then
- luasnip.expand_or_jump()
- end
- end, { 'i', 's' }),
- ['<C-h>'] = cmp.mapping(function()
- if luasnip.locally_jumpable(-1) then
- luasnip.jump(-1)
- end
- end, { 'i', 's' }),
-
- -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
- -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
- },
- sources = {
- {
- name = 'lazydev',
- -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
- group_index = 0,
- },
- { name = 'nvim_lsp' },
- { name = 'luasnip' },
- { name = 'path' },
- { name = 'nvim_lsp_signature_help' },
- },
- }
- end,
- },
-
- { -- You can easily change to a different colorscheme.
- -- Change the name of the colorscheme plugin below, and then
- -- change the command in the config to whatever the name of that colorscheme is.
- --
- -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
- 'folke/tokyonight.nvim',
- priority = 1000, -- Make sure to load this before all the other start plugins.
- config = function()
- ---@diagnostic disable-next-line: missing-fields
- require('tokyonight').setup {
- styles = {
- comments = { italic = false }, -- Disable italics in comments
- },
- }
-
- -- Load the colorscheme here.
- -- Like many other themes, this one has different styles, and you could load
- -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
- vim.cmd.colorscheme 'tokyonight-night'
- end,
- },
-
- -- Highlight todo, notes, etc in comments
- { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
-
- { -- Collection of various small independent plugins/modules
- 'echasnovski/mini.nvim',
- config = function()
- -- Better Around/Inside textobjects
- --
- -- Examples:
- -- - va) - [V]isually select [A]round [)]paren
- -- - yinq - [Y]ank [I]nside [N]ext [Q]uote
- -- - ci' - [C]hange [I]nside [']quote
- require('mini.ai').setup { n_lines = 500 }
-
- -- Add/delete/replace surroundings (brackets, quotes, etc.)
- --
- -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
- -- - sd' - [S]urround [D]elete [']quotes
- -- - sr)' - [S]urround [R]eplace [)] [']
- require('mini.surround').setup()
-
- -- Simple and easy statusline.
- -- You could remove this setup call if you don't like it,
- -- and try some other statusline plugin
- local statusline = require 'mini.statusline'
- -- set use_icons to true if you have a Nerd Font
- statusline.setup { use_icons = vim.g.have_nerd_font }
-
- -- You can configure sections in the statusline by overriding their
- -- default behavior. For example, here we set the section for
- -- cursor location to LINE:COLUMN
- ---@diagnostic disable-next-line: duplicate-set-field
- statusline.section_location = function()
- return '%2l:%-2v'
- end
-
- -- ... and there is more!
- -- Check out: https://github.com/echasnovski/mini.nvim
- end,
- },
- { -- Highlight, edit, and navigate code
- 'nvim-treesitter/nvim-treesitter',
- build = ':TSUpdate',
- main = 'nvim-treesitter.configs', -- Sets main module to use for opts
- -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
- opts = {
- ensure_installed = { 'bash', 'go', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
- -- Autoinstall languages that are not installed
- auto_install = true,
- highlight = {
- enable = true,
- -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
- -- If you are experiencing weird indenting issues, add the language to
- -- the list of additional_vim_regex_highlighting and disabled languages for indent.
- additional_vim_regex_highlighting = { 'ruby' },
- },
- indent = { enable = true, disable = { 'ruby' } },
- },
- -- There are additional nvim-treesitter modules that you can use to interact
- -- with nvim-treesitter. You should go explore a few and see what interests you:
- --
- -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
- -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
- -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
- },
-
- -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the
- -- init.lua. If you want these files, they are in the repository, so you can just download them and
- -- place them in the correct locations.
-
- -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
- --
- -- Here are some example plugins that I've included in the Kickstart repository.
- -- Uncomment any of the lines below to enable them (you will need to restart nvim).
- --
- -- require 'kickstart.plugins.debug',
- -- require 'kickstart.plugins.indent_line',
- -- require 'kickstart.plugins.lint',
- -- require 'kickstart.plugins.autopairs',
- -- require 'kickstart.plugins.neo-tree',
- -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
-
- -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
- -- This is the easiest way to modularize your config.
- --
- -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
- -- { import = 'custom.plugins' },
- --
- -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
- -- Or use telescope!
- -- In normal mode type `<space>sh` then write `lazy.nvim-plugin`
- -- you can continue same window with `<space>sr` which resumes last telescope search
+require("lazy").setup({
+ -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
+ "tpope/vim-sleuth", -- Detect tabstop and shiftwidth automatically
+
+ -- NOTE: Plugins can also be added by using a table,
+ -- with the first argument being the link and the following
+ -- keys can be used to configure plugin behavior/loading/etc.
+ --
+ -- Use `opts = {}` to force a plugin to be loaded.
+ --
+
+ -- Here is a more advanced example where we pass configuration
+ -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
+ -- require('gitsigns').setup({ ... })
+ --
+ -- See `:help gitsigns` to understand what the configuration keys do
+ { -- Adds git related signs to the gutter, as well as utilities for managing changes
+ "lewis6991/gitsigns.nvim",
+ opts = {
+ signs = {
+ add = { text = "+" },
+ change = { text = "~" },
+ delete = { text = "_" },
+ topdelete = { text = "‾" },
+ changedelete = { text = "~" },
+ },
+ },
+ },
+
+ -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
+ --
+ -- This is often very useful to both group configuration, as well as handle
+ -- lazy loading plugins that don't need to be loaded immediately at startup.
+ --
+ -- For example, in the following configuration, we use:
+ -- event = 'VimEnter'
+ --
+ -- which loads which-key before all the UI elements are loaded. Events can be
+ -- normal autocommands events (`:help autocmd-events`).
+ --
+ -- Then, because we use the `config` key, the configuration only runs
+ -- after the plugin has been loaded:
+ -- config = function() ... end
+
+ { -- Useful plugin to show you pending keybinds.
+ "folke/which-key.nvim",
+ event = "VimEnter", -- Sets the loading event to 'VimEnter'
+ opts = {
+ icons = {
+ -- set icon mappings to true if you have a Nerd Font
+ mappings = vim.g.have_nerd_font,
+ -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
+ -- default whick-key.nvim defined Nerd Font icons, otherwise define a string table
+ keys = vim.g.have_nerd_font and {} or {
+ Up = "<Up> ",
+ Down = "<Down> ",
+ Left = "<Left> ",
+ Right = "<Right> ",
+ C = "<C-…> ",
+ M = "<M-…> ",
+ D = "<D-…> ",
+ S = "<S-…> ",
+ CR = "<CR> ",
+ Esc = "<Esc> ",
+ ScrollWheelDown = "<ScrollWheelDown> ",
+ ScrollWheelUp = "<ScrollWheelUp> ",
+ NL = "<NL> ",
+ BS = "<BS> ",
+ Space = "<Space> ",
+ Tab = "<Tab> ",
+ F1 = "<F1>",
+ F2 = "<F2>",
+ F3 = "<F3>",
+ F4 = "<F4>",
+ F5 = "<F5>",
+ F6 = "<F6>",
+ F7 = "<F7>",
+ F8 = "<F8>",
+ F9 = "<F9>",
+ F10 = "<F10>",
+ F11 = "<F11>",
+ F12 = "<F12>",
+ },
+ },
+
+ -- Document existing key chains
+ spec = {
+ { "<leader>c", group = "[C]ode", mode = { "n", "x" } },
+ { "<leader>d", group = "[D]ocument" },
+ { "<leader>r", group = "[R]ename" },
+ { "<leader>s", group = "[S]earch" },
+ { "<leader>w", group = "[W]orkspace" },
+ { "<leader>t", group = "[T]oggle" },
+ { "<leader>h", group = "Git [H]unk", mode = { "n", "v" } },
+ },
+ },
+ },
+
+ -- NOTE: Plugins can specify dependencies.
+ --
+ -- The dependencies are proper plugin specifications as well - anything
+ -- you do for a plugin at the top level, you can do for a dependency.
+ --
+ -- Use the `dependencies` key to specify the dependencies of a particular plugin
+
+ { -- Fuzzy Finder (files, lsp, etc)
+ "nvim-telescope/telescope.nvim",
+ event = "VimEnter",
+ branch = "0.1.x",
+ dependencies = {
+ "nvim-lua/plenary.nvim",
+ { -- If encountering errors, see telescope-fzf-native README for installation instructions
+ "nvim-telescope/telescope-fzf-native.nvim",
+
+ -- `build` is used to run some command when the plugin is installed/updated.
+ -- This is only run then, not every time Neovim starts up.
+ build = "make",
+
+ -- `cond` is a condition used to determine whether this plugin should be
+ -- installed and loaded.
+ cond = function()
+ return vim.fn.executable("make") == 1
+ end,
+ },
+ { "nvim-telescope/telescope-ui-select.nvim" },
+
+ -- Useful for getting pretty icons, but requires a Nerd Font.
+ { "nvim-tree/nvim-web-devicons", enabled = vim.g.have_nerd_font },
+ },
+ config = function()
+ -- Telescope is a fuzzy finder that comes with a lot of different things that
+ -- it can fuzzy find! It's more than just a "file finder", it can search
+ -- many different aspects of Neovim, your workspace, LSP, and more!
+ --
+ -- The easiest way to use Telescope, is to start by doing something like:
+ -- :Telescope help_tags
+ --
+ -- After running this command, a window will open up and you're able to
+ -- type in the prompt window. You'll see a list of `help_tags` options and
+ -- a corresponding preview of the help.
+ --
+ -- Two important keymaps to use while in Telescope are:
+ -- - Insert mode: <c-/>
+ -- - Normal mode: ?
+ --
+ -- This opens a window that shows you all of the keymaps for the current
+ -- Telescope picker. This is really useful to discover what Telescope can
+ -- do as well as how to actually do it!
+
+ -- [[ Configure Telescope ]]
+ -- See `:help telescope` and `:help telescope.setup()`
+ require("telescope").setup({
+ -- You can put your default mappings / updates / etc. in here
+ -- All the info you're looking for is in `:help telescope.setup()`
+ --
+ -- defaults = {
+ -- mappings = {
+ -- i = { ['<c-enter>'] = 'to_fuzzy_refine' },
+ -- },
+ -- },
+ -- pickers = {}
+ extensions = {
+ ["ui-select"] = {
+ require("telescope.themes").get_dropdown(),
+ },
+ },
+ })
+
+ -- Enable Telescope extensions if they are installed
+ pcall(require("telescope").load_extension, "fzf")
+ pcall(require("telescope").load_extension, "ui-select")
+
+ -- See `:help telescope.builtin`
+ local builtin = require("telescope.builtin")
+ vim.keymap.set("n", "<leader>sh", builtin.help_tags, { desc = "[S]earch [H]elp" })
+ vim.keymap.set("n", "<leader>sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" })
+ vim.keymap.set("n", "<leader>sf", builtin.find_files, { desc = "[S]earch [F]iles" })
+ vim.keymap.set("n", "<leader>ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" })
+ vim.keymap.set("n", "<leader>sw", builtin.grep_string, { desc = "[S]earch current [W]ord" })
+ vim.keymap.set("n", "<leader>sg", builtin.live_grep, { desc = "[S]earch by [G]rep" })
+ vim.keymap.set("n", "<leader>sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" })
+ vim.keymap.set("n", "<leader>sr", builtin.resume, { desc = "[S]earch [R]esume" })
+ vim.keymap.set("n", "<leader>s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
+ vim.keymap.set("n", "<leader><leader>", builtin.buffers, { desc = "[ ] Find existing buffers" })
+
+ -- Slightly advanced example of overriding default behavior and theme
+ vim.keymap.set("n", "<leader>/", function()
+ -- You can pass additional configuration to Telescope to change the theme, layout, etc.
+ builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown({
+ winblend = 10,
+ previewer = false,
+ }))
+ end, { desc = "[/] Fuzzily search in current buffer" })
+
+ -- It's also possible to pass additional configuration options.
+ -- See `:help telescope.builtin.live_grep()` for information about particular keys
+ vim.keymap.set("n", "<leader>s/", function()
+ builtin.live_grep({
+ grep_open_files = true,
+ prompt_title = "Live Grep in Open Files",
+ })
+ end, { desc = "[S]earch [/] in Open Files" })
+
+ -- Shortcut for searching your Neovim configuration files
+ vim.keymap.set("n", "<leader>sn", function()
+ builtin.find_files({ cwd = vim.fn.stdpath("config") })
+ end, { desc = "[S]earch [N]eovim files" })
+ end,
+ },
+
+ -- LSP Plugins
+ {
+ -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
+ -- used for completion, annotations and signatures of Neovim apis
+ "folke/lazydev.nvim",
+ ft = "lua",
+ opts = {
+ library = {
+ -- Load luvit types when the `vim.uv` word is found
+ { path = "luvit-meta/library", words = { "vim%.uv" } },
+ },
+ },
+ },
+ { "Bilal2453/luvit-meta", lazy = true },
+ {
+ -- Main LSP Configuration
+ "neovim/nvim-lspconfig",
+ dependencies = {
+ -- Automatically install LSPs and related tools to stdpath for Neovim
+ { "williamboman/mason.nvim", config = true }, -- NOTE: Must be loaded before dependants
+ "williamboman/mason-lspconfig.nvim",
+ "WhoIsSethDaniel/mason-tool-installer.nvim",
+
+ -- Useful status updates for LSP.
+ -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
+ { "j-hui/fidget.nvim", opts = {} },
+
+ -- Allows extra capabilities provided by nvim-cmp
+ "hrsh7th/cmp-nvim-lsp",
+ },
+ config = function()
+ -- Brief aside: **What is LSP?**
+ --
+ -- LSP is an initialism you've probably heard, but might not understand what it is.
+ --
+ -- LSP stands for Language Server Protocol. It's a protocol that helps editors
+ -- and language tooling communicate in a standardized fashion.
+ --
+ -- In general, you have a "server" which is some tool built to understand a particular
+ -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers
+ -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
+ -- processes that communicate with some "client" - in this case, Neovim!
+ --
+ -- LSP provides Neovim with features like:
+ -- - Go to definition
+ -- - Find references
+ -- - Autocompletion
+ -- - Symbol Search
+ -- - and more!
+ --
+ -- Thus, Language Servers are external tools that must be installed separately from
+ -- Neovim. This is where `mason` and related plugins come into play.
+ --
+ -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
+ -- and elegantly composed help section, `:help lsp-vs-treesitter`
+
+ -- This function gets run when an LSP attaches to a particular buffer.
+ -- That is to say, every time a new file is opened that is associated with
+ -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
+ -- function will be executed to configure the current buffer
+ vim.api.nvim_create_autocmd("LspAttach", {
+ group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }),
+ callback = function(event)
+ -- NOTE: Remember that Lua is a real programming language, and as such it is possible
+ -- to define small helper and utility functions so you don't have to repeat yourself.
+ --
+ -- In this case, we create a function that lets us more easily define mappings specific
+ -- for LSP related items. It sets the mode, buffer and description for us each time.
+ local map = function(keys, func, desc, mode)
+ mode = mode or "n"
+ vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = "LSP: " .. desc })
+ end
+
+ -- Jump to the definition of the word under your cursor.
+ -- This is where a variable was first declared, or where a function is defined, etc.
+ -- To jump back, press <C-t>.
+ map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition")
+
+ -- Find references for the word under your cursor.
+ map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences")
+
+ -- Jump to the implementation of the word under your cursor.
+ -- Useful when your language has ways of declaring types without an actual implementation.
+ map("gI", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation")
+
+ -- Jump to the type of the word under your cursor.
+ -- Useful when you're not sure what type a variable is and you want to see
+ -- the definition of its *type*, not where it was *defined*.
+ map("<leader>D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition")
+
+ -- Fuzzy find all the symbols in your current document.
+ -- Symbols are things like variables, functions, types, etc.
+ map("<leader>ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols")
+
+ -- Fuzzy find all the symbols in your current workspace.
+ -- Similar to document symbols, except searches over your entire project.
+ map(
+ "<leader>ws",
+ require("telescope.builtin").lsp_dynamic_workspace_symbols,
+ "[W]orkspace [S]ymbols"
+ )
+
+ -- Rename the variable under your cursor.
+ -- Most Language Servers support renaming across files, etc.
+ map("<leader>rn", vim.lsp.buf.rename, "[R]e[n]ame")
+
+ -- Execute a code action, usually your cursor needs to be on top of an error
+ -- or a suggestion from your LSP for this to activate.
+ map("<leader>ca", vim.lsp.buf.code_action, "[C]ode [A]ction", { "n", "x" })
+
+ -- WARN: This is not Goto Definition, this is Goto Declaration.
+ -- For example, in C this would take you to the header.
+ map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration")
+
+ -- The following two autocommands are used to highlight references of the
+ -- word under your cursor when your cursor rests there for a little while.
+ -- See `:help CursorHold` for information about when this is executed
+ --
+ -- When you move your cursor, the highlights will be cleared (the second autocommand).
+ local client = vim.lsp.get_client_by_id(event.data.client_id)
+ if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
+ local highlight_augroup =
+ vim.api.nvim_create_augroup("kickstart-lsp-highlight", { clear = false })
+ vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, {
+ buffer = event.buf,
+ group = highlight_augroup,
+ callback = vim.lsp.buf.document_highlight,
+ })
+
+ vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, {
+ buffer = event.buf,
+ group = highlight_augroup,
+ callback = vim.lsp.buf.clear_references,
+ })
+
+ vim.api.nvim_create_autocmd("LspDetach", {
+ group = vim.api.nvim_create_augroup("kickstart-lsp-detach", { clear = true }),
+ callback = function(event2)
+ vim.lsp.buf.clear_references()
+ vim.api.nvim_clear_autocmds({ group = "kickstart-lsp-highlight", buffer = event2.buf })
+ end,
+ })
+ end
+
+ -- The following code creates a keymap to toggle inlay hints in your
+ -- code, if the language server you are using supports them
+ --
+ -- This may be unwanted, since they displace some of your code
+ if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
+ map("<leader>th", function()
+ vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled({ bufnr = event.buf }))
+ end, "[T]oggle Inlay [H]ints")
+ end
+ end,
+ })
+
+ -- LSP servers and clients are able to communicate to each other what features they support.
+ -- By default, Neovim doesn't support everything that is in the LSP specification.
+ -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
+ -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
+ local capabilities = vim.lsp.protocol.make_client_capabilities()
+ capabilities = vim.tbl_deep_extend("force", capabilities, require("cmp_nvim_lsp").default_capabilities())
+
+ -- Enable the following language servers
+ -- Feel free to add/remove any LSPs that you want here. They will automatically be installed.
+ --
+ -- Add any additional override configuration in the following tables. Available keys are:
+ -- - cmd (table): Override the default command used to start the server
+ -- - filetypes (table): Override the default list of associated filetypes for the server
+ -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
+ -- - settings (table): Override the default settings passed when initializing the server.
+ -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
+ local servers = {
+ -- clangd = {},
+ gopls = {},
+ -- pyright = {},
+ -- rust_analyzer = {},
+ -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
+ --
+ -- Some languages (like typescript) have entire language plugins that can be useful:
+ -- https://github.com/pmizio/typescript-tools.nvim
+ --
+ -- But for many setups, the LSP (`ts_ls`) will work just fine
+ -- ts_ls = {},
+ --
+
+ lua_ls = {
+ -- cmd = {...},
+ -- filetypes = { ...},
+ -- capabilities = {},
+ settings = {
+ Lua = {
+ completion = {
+ callSnippet = "Replace",
+ },
+ -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
+ -- diagnostics = { disable = { 'missing-fields' } },
+ },
+ },
+ },
+ }
+
+ -- Ensure the servers and tools above are installed
+ -- To check the current status of installed tools and/or manually install
+ -- other tools, you can run
+ -- :Mason
+ --
+ -- You can press `g?` for help in this menu.
+ require("mason").setup()
+
+ -- You can add other tools here that you want Mason to install
+ -- for you, so that they are available from within Neovim.
+ local ensure_installed = vim.tbl_keys(servers or {})
+ vim.list_extend(ensure_installed, {
+ "stylua", -- Used to format Lua code
+ })
+ require("mason-tool-installer").setup({ ensure_installed = ensure_installed })
+
+ require("mason-lspconfig").setup({
+ handlers = {
+ function(server_name)
+ local server = servers[server_name] or {}
+ -- This handles overriding only values explicitly passed
+ -- by the server configuration above. Useful when disabling
+ -- certain features of an LSP (for example, turning off formatting for ts_ls)
+ server.capabilities = vim.tbl_deep_extend("force", {}, capabilities, server.capabilities or {})
+ require("lspconfig")[server_name].setup(server)
+ end,
+ },
+ })
+ end,
+ },
+
+ { -- Autoformat
+ "stevearc/conform.nvim",
+ event = { "BufWritePre" },
+ cmd = { "ConformInfo" },
+ keys = {
+ {
+ "<leader>f",
+ function()
+ require("conform").format({ async = true, lsp_format = "fallback" })
+ end,
+ mode = "",
+ desc = "[F]ormat buffer",
+ },
+ },
+ opts = {
+ notify_on_error = false,
+ format_on_save = function(bufnr)
+ -- Disable "format_on_save lsp_fallback" for languages that don't
+ -- have a well standardized coding style. You can add additional
+ -- languages here or re-enable it for the disabled ones.
+ local disable_filetypes = { c = true, cpp = true }
+ local lsp_format_opt
+ if disable_filetypes[vim.bo[bufnr].filetype] then
+ lsp_format_opt = "never"
+ else
+ lsp_format_opt = "fallback"
+ end
+ return {
+ timeout_ms = 500,
+ lsp_format = lsp_format_opt,
+ }
+ end,
+ formatters_by_ft = {
+ lua = { "stylua" },
+ -- Conform can also run multiple formatters sequentially
+ -- python = { "isort", "black" },
+ --
+ -- You can use 'stop_after_first' to run the first available formatter from the list
+ -- javascript = { "prettierd", "prettier", stop_after_first = true },
+ },
+ },
+ },
+
+ { -- Autocompletion
+ "hrsh7th/nvim-cmp",
+ event = "InsertEnter",
+ dependencies = {
+ -- Snippet Engine & its associated nvim-cmp source
+ {
+ "L3MON4D3/LuaSnip",
+ build = (function()
+ -- Build Step is needed for regex support in snippets.
+ -- This step is not supported in many windows environments.
+ -- Remove the below condition to re-enable on windows.
+ if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then
+ return
+ end
+ return "make install_jsregexp"
+ end)(),
+ dependencies = {
+ -- `friendly-snippets` contains a variety of premade snippets.
+ -- See the README about individual language/framework/plugin snippets:
+ -- https://github.com/rafamadriz/friendly-snippets
+ -- {
+ -- 'rafamadriz/friendly-snippets',
+ -- config = function()
+ -- require('luasnip.loaders.from_vscode').lazy_load()
+ -- end,
+ -- },
+ },
+ },
+ "saadparwaiz1/cmp_luasnip",
+
+ -- Adds other completion capabilities.
+ -- nvim-cmp does not ship with all sources by default. They are split
+ -- into multiple repos for maintenance purposes.
+ "hrsh7th/cmp-nvim-lsp",
+ "hrsh7th/cmp-path",
+ },
+ config = function()
+ -- See `:help cmp`
+ local cmp = require("cmp")
+ local luasnip = require("luasnip")
+ luasnip.config.setup({})
+
+ cmp.setup({
+ snippet = {
+ expand = function(args)
+ luasnip.lsp_expand(args.body)
+ end,
+ },
+ completion = { completeopt = "menu,menuone,noinsert" },
+
+ -- For an understanding of why these mappings were
+ -- chosen, you will need to read `:help ins-completion`
+ --
+ -- No, but seriously. Please read `:help ins-completion`, it is really good!
+ mapping = cmp.mapping.preset.insert({
+ -- Select the [n]ext item
+ ["<C-n>"] = cmp.mapping.select_next_item(),
+ -- Select the [p]revious item
+ ["<C-p>"] = cmp.mapping.select_prev_item(),
+
+ -- Scroll the documentation window [b]ack / [f]orward
+ ["<C-b>"] = cmp.mapping.scroll_docs(-4),
+ ["<C-f>"] = cmp.mapping.scroll_docs(4),
+
+ -- Accept ([y]es) the completion.
+ -- This will auto-import if your LSP supports it.
+ -- This will expand snippets if the LSP sent a snippet.
+ ["<C-y>"] = cmp.mapping.confirm({ select = true }),
+
+ -- If you prefer more traditional completion keymaps,
+ -- you can uncomment the following lines
+ --['<CR>'] = cmp.mapping.confirm { select = true },
+ --['<Tab>'] = cmp.mapping.select_next_item(),
+ --['<S-Tab>'] = cmp.mapping.select_prev_item(),
+
+ -- Manually trigger a completion from nvim-cmp.
+ -- Generally you don't need this, because nvim-cmp will display
+ -- completions whenever it has completion options available.
+ ["<C-Space>"] = cmp.mapping.complete({}),
+
+ -- Think of <c-l> as moving to the right of your snippet expansion.
+ -- So if you have a snippet that's like:
+ -- function $name($args)
+ -- $body
+ -- end
+ --
+ -- <c-l> will move you to the right of each of the expansion locations.
+ -- <c-h> is similar, except moving you backwards.
+ ["<C-l>"] = cmp.mapping(function()
+ if luasnip.expand_or_locally_jumpable() then
+ luasnip.expand_or_jump()
+ end
+ end, { "i", "s" }),
+ ["<C-h>"] = cmp.mapping(function()
+ if luasnip.locally_jumpable(-1) then
+ luasnip.jump(-1)
+ end
+ end, { "i", "s" }),
+
+ -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+ -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
+ }),
+ sources = {
+ {
+ name = "lazydev",
+ -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
+ group_index = 0,
+ },
+ { name = "nvim_lsp" },
+ { name = "luasnip" },
+ { name = "path" },
+ },
+ })
+ end,
+ },
+
+ { -- You can easily change to a different colorscheme.
+ -- Change the name of the colorscheme plugin below, and then
+ -- change the command in the config to whatever the name of that colorscheme is.
+ --
+ -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
+ "folke/tokyonight.nvim",
+ priority = 1000, -- Make sure to load this before all the other start plugins.
+ init = function()
+ -- Load the colorscheme here.
+ -- Like many other themes, this one has different styles, and you could load
+ -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
+ vim.cmd.colorscheme("tokyonight-night")
+
+ -- You can configure highlights by doing something like:
+ vim.cmd.hi("Comment gui=none")
+ end,
+ },
+
+ -- Highlight todo, notes, etc in comments
+ {
+ "folke/todo-comments.nvim",
+ event = "VimEnter",
+ dependencies = { "nvim-lua/plenary.nvim" },
+ opts = { signs = false },
+ },
+
+ { -- Collection of various small independent plugins/modules
+ "echasnovski/mini.nvim",
+ config = function()
+ -- Better Around/Inside textobjects
+ --
+ -- Examples:
+ -- - va) - [V]isually select [A]round [)]paren
+ -- - yinq - [Y]ank [I]nside [N]ext [Q]uote
+ -- - ci' - [C]hange [I]nside [']quote
+ require("mini.ai").setup({ n_lines = 500 })
+
+ -- Add/delete/replace surroundings (brackets, quotes, etc.)
+ --
+ -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
+ -- - sd' - [S]urround [D]elete [']quotes
+ -- - sr)' - [S]urround [R]eplace [)] [']
+ require("mini.surround").setup()
+
+ -- Simple and easy statusline.
+ -- You could remove this setup call if you don't like it,
+ -- and try some other statusline plugin
+ local statusline = require("mini.statusline")
+ -- set use_icons to true if you have a Nerd Font
+ statusline.setup({ use_icons = vim.g.have_nerd_font })
+
+ -- You can configure sections in the statusline by overriding their
+ -- default behavior. For example, here we set the section for
+ -- cursor location to LINE:COLUMN
+ ---@diagnostic disable-next-line: duplicate-set-field
+ statusline.section_location = function()
+ return "%2l:%-2v"
+ end
+
+ -- ... and there is more!
+ -- Check out: https://github.com/echasnovski/mini.nvim
+ end,
+ },
+ { -- Highlight, edit, and navigate code
+ "nvim-treesitter/nvim-treesitter",
+ build = ":TSUpdate",
+ main = "nvim-treesitter.configs", -- Sets main module to use for opts
+ -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+ opts = {
+ ensure_installed = {
+ "bash",
+ "c",
+ "diff",
+ "go",
+ "html",
+ "lua",
+ "luadoc",
+ "markdown",
+ "markdown_inline",
+ "query",
+ "vim",
+ "vimdoc",
+ "yaml",
+ },
+ -- Autoinstall languages that are not installed
+ auto_install = true,
+ highlight = {
+ enable = true,
+ -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
+ -- If you are experiencing weird indenting issues, add the language to
+ -- the list of additional_vim_regex_highlighting and disabled languages for indent.
+ additional_vim_regex_highlighting = { "ruby" },
+ },
+ indent = { enable = true, disable = { "ruby" } },
+ },
+ -- There are additional nvim-treesitter modules that you can use to interact
+ -- with nvim-treesitter. You should go explore a few and see what interests you:
+ --
+ -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+ -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+ -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
+ },
+
+ -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
+ -- init.lua. If you want these files, they are in the repository, so you can just download them and
+ -- place them in the correct locations.
+
+ -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
+ --
+ -- Here are some example plugins that I've included in the Kickstart repository.
+ -- Uncomment any of the lines below to enable them (you will need to restart nvim).
+ --
+ -- require 'kickstart.plugins.debug',
+ -- require 'kickstart.plugins.indent_line',
+ -- require 'kickstart.plugins.lint',
+ -- require 'kickstart.plugins.autopairs',
+ -- require 'kickstart.plugins.neo-tree',
+ -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
+
+ -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
+ -- This is the easiest way to modularize your config.
+ --
+ -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
+ -- For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
+ -- { import = 'custom.plugins' },
}, {
- ui = {
- -- If you are using a Nerd Font: set icons to an empty table which will use the
- -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
- icons = vim.g.have_nerd_font and {} or {
- cmd = '⌘',
- config = '🛠',
- event = '📅',
- ft = '📂',
- init = '⚙',
- keys = '🗝',
- plugin = '🔌',
- runtime = '💻',
- require = '🌙',
- source = '📄',
- start = '🚀',
- task = '📌',
- lazy = '💤 ',
- },
- },
+ ui = {
+ -- If you are using a Nerd Font: set icons to an empty table which will use the
+ -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
+ icons = vim.g.have_nerd_font and {} or {
+ cmd = "⌘",
+ config = "🛠",
+ event = "📅",
+ ft = "📂",
+ init = "⚙",
+ keys = "🗝",
+ plugin = "🔌",
+ runtime = "💻",
+ require = "🌙",
+ source = "📄",
+ start = "🚀",
+ task = "📌",
+ lazy = "💤 ",
+ },
+ },
})
-- The line beneath this is called `modeline`. See `:help modeline`
internal/extractor/extractor.go
@@ -43,8 +43,8 @@ type Extractor struct {
// TODO: Options
func New(
- dst string,
fs fs.FS,
+ dst string,
) (*Extractor, error) {
mode := os.FileMode(0o700)
internal/golang/go1.24.2.linux-amd64.tar.gz
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:68097bd680839cbc9d464a0edce4f7c333975e27a90246890e9f1078c7e702ad
+size 78516109
internal/golang/golang.go
@@ -0,0 +1,102 @@
+package golang
+
+import (
+ _ "embed"
+ "text/template"
+
+ "archive/tar"
+ "bytes"
+ "compress/gzip"
+ "errors"
+ "fmt"
+ "io"
+ "os"
+ "path/filepath"
+)
+
+//go:embed go1.*.linux-amd64.tar.gz
+var goSrc []byte
+
+func bashrcd() error {
+ // TODO: installDir
+ homeDir := os.Getenv("HOME")
+ installDir := filepath.Join(homeDir, ".local")
+ rcPath := filepath.Join(homeDir, ".bashrc.d", "go.sh")
+
+ const tmpl = `#!/bin/bash
+export PATH=$PATH:{{ .InstallDir }}/go/bin
+`
+
+ t, err := template.New("pathRC").Parse(tmpl)
+ if err != nil {
+ return err
+ }
+ f, err := os.Create(rcPath)
+ if err != nil {
+ return err
+ }
+ err = t.Execute(f, struct{ InstallDir string }{InstallDir: installDir})
+ if err != nil {
+ return err
+ }
+ return nil
+}
+
+func Install() error {
+ // TODO: installDir
+ homeDir := os.Getenv("HOME")
+ installDir := filepath.Join(homeDir, ".local")
+
+ err := bashrcd()
+ if err != nil {
+ return fmt.Errorf("failed to install bashrc.d env helper: %w", err)
+ }
+
+ err = os.RemoveAll(installDir)
+ if err != nil {
+ return fmt.Errorf("failed to cleanup old install: %w", err)
+ }
+
+ gr, err := gzip.NewReader(bytes.NewReader(goSrc))
+ if err != nil {
+ return fmt.Errorf("failed to setup gzip reader: %w", err)
+ }
+ tr := tar.NewReader(gr)
+
+ for {
+ header, err := tr.Next()
+ if err != nil {
+ if errors.Is(err, io.EOF) {
+ break
+ }
+ return err
+ }
+ mode := os.FileMode(header.Mode)
+
+ target := filepath.Join(installDir, header.Name)
+ switch header.Typeflag {
+ case tar.TypeDir:
+ err = os.MkdirAll(target, mode)
+ if err != nil {
+ return err
+ }
+ case tar.TypeReg:
+
+ flag := os.O_CREATE | os.O_WRONLY | os.O_TRUNC
+ f, err := os.OpenFile(target, flag, mode)
+ if err != nil {
+ return err
+ }
+ _, err = io.Copy(f, tr)
+ if err != nil {
+ return err
+ }
+ err = f.Close()
+ if err != nil {
+ return err
+ }
+ }
+ }
+
+ return nil
+}
.gitattributes
@@ -1,4 +1,5 @@
home/.cache/bindle/* filter=lfs diff=lfs merge=lfs -text
+internal/golang/*.tar.gz filter=lfs diff=lfs merge=lfs -text
*.tar.gz filter=lfs diff=lfs merge=lfs -text
*.tar.xz filter=lfs diff=lfs merge=lfs -text
internal/*/*.tar.gz filter=lfs diff=lfs merge=lfs -text
main.go
@@ -9,6 +9,7 @@ import (
"os"
"github.com/bryfry/bindle/internal/extractor"
+ "github.com/bryfry/bindle/internal/golang"
)
//go:embed home/**
@@ -18,21 +19,26 @@ const _homeRoot = "home"
func main() {
- logger := slog.Default()
- homeDir := os.Getenv("HOME")
-
contentFS, err := fs.Sub(_homeFS, _homeRoot)
if err != nil {
fmt.Println(err)
return // fmt.Errorf("config deploy failed: %w", path, err)
}
- e, _ := extractor.New(homeDir, contentFS)
+ homeDir := os.Getenv("HOME")
+ e, _ := extractor.New(contentFS, homeDir)
err = e.Deploy()
if err != nil {
fmt.Println(err)
return // fmt.Errorf("config deploy failed: %w", path, err)
}
+ logger := slog.Default()
e.LogResults(logger, context.Background())
+
+ err = golang.Install()
+ if err != nil {
+ fmt.Println(err)
+ return // fmt.Errorf("config deploy failed: %w", path, err)
+ }
}