mf4
1-- Set <space> as the leader key
2-- See `:help mapleader`
3-- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
4vim.g.mapleader = " "
5vim.g.maplocalleader = " "
6
7-- Set to true if you have a Nerd Font installed and selected in the terminal
8vim.g.have_nerd_font = true
9
10-- [[ Setting options ]]
11-- See `:help vim.opt`
12-- NOTE: You can change these options as you wish!
13-- For more options, you can see `:help option-list`
14
15-- Make line numbers default
16vim.opt.number = true
17-- You can also add relative line numbers, to help with jumping.
18-- Experiment for yourself to see if you like it!
19-- vim.opt.relativenumber = true
20
21-- Disable mouse mode, not useful
22vim.opt.mouse = ""
23
24-- Don't show the mode, since it's already in the status line
25vim.opt.showmode = false
26
27-- Sync clipboard between OS and Neovim.
28-- Schedule the setting after `UiEnter` because it can increase startup-time.
29-- Remove this option if you want your OS clipboard to remain independent.
30-- See `:help 'clipboard'`
31vim.schedule(function()
32 vim.opt.clipboard = "unnamedplus"
33end)
34
35-- Enable break indent
36vim.opt.breakindent = true
37
38-- Save undo history
39vim.opt.undofile = true
40
41-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
42vim.opt.ignorecase = true
43vim.opt.smartcase = true
44
45-- Keep signcolumn on by default
46vim.opt.signcolumn = "yes"
47
48-- Decrease update time
49vim.opt.updatetime = 250
50
51-- Decrease mapped sequence wait time
52-- Displays which-key popup sooner
53vim.opt.timeoutlen = 300
54
55-- Configure how new splits should be opened
56vim.opt.splitright = true
57vim.opt.splitbelow = true
58
59-- Sets how neovim will display certain whitespace characters in the editor.
60-- See `:help 'list'`
61-- and `:help 'listchars'`
62vim.opt.list = true
63vim.opt.listchars = { tab = " ", trail = "·", nbsp = "␣" }
64
65-- Preview substitutions live, as you type!
66vim.opt.inccommand = "split"
67
68-- Show which line your cursor is on
69vim.opt.cursorline = true
70
71-- Minimal number of screen lines to keep above and below the cursor.
72vim.opt.scrolloff = 10
73
74-- [[ Basic Keymaps ]]
75-- See `:help vim.keymap.set()`
76
77-- Clear highlights on search when pressing <Esc> in normal mode
78-- See `:help hlsearch`
79vim.keymap.set("n", "<Esc>", "<cmd>nohlsearch<CR>")
80
81-- Diagnostic keymaps
82vim.keymap.set("n", "<leader>q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" })
83
84-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
85-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
86-- is not what someone will guess without a bit more experience.
87--
88-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
89-- or just use <C-\><C-n> to exit terminal mode
90vim.keymap.set("t", "<Esc><Esc>", "<C-\\><C-n>", { desc = "Exit terminal mode" })
91
92-- TIP: Disable arrow keys in normal mode
93-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
94-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
95-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
96-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
97
98-- Keybinds to make split navigation easier.
99-- Use CTRL+<hjkl> to switch between windows
100--
101-- See `:help wincmd` for a list of all window commands
102vim.keymap.set("n", "<C-h>", "<C-w><C-h>", { desc = "Move focus to the left window" })
103vim.keymap.set("n", "<C-l>", "<C-w><C-l>", { desc = "Move focus to the right window" })
104vim.keymap.set("n", "<C-j>", "<C-w><C-j>", { desc = "Move focus to the lower window" })
105vim.keymap.set("n", "<C-k>", "<C-w><C-k>", { desc = "Move focus to the upper window" })
106
107-- [[ Basic Autocommands ]]
108-- See `:help lua-guide-autocommands`
109
110-- Highlight when yanking (copying) text
111-- Try it with `yap` in normal mode
112-- See `:help vim.highlight.on_yank()`
113vim.api.nvim_create_autocmd("TextYankPost", {
114 desc = "Highlight when yanking (copying) text",
115 group = vim.api.nvim_create_augroup("kickstart-highlight-yank", { clear = true }),
116 callback = function()
117 vim.highlight.on_yank()
118 end,
119})
120
121-- [[ Install `lazy.nvim` plugin manager ]]
122-- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
123local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
124if not (vim.uv or vim.loop).fs_stat(lazypath) then
125 local lazyrepo = "https://github.com/folke/lazy.nvim.git"
126 local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
127 if vim.v.shell_error ~= 0 then
128 error("Error cloning lazy.nvim:\n" .. out)
129 end
130end ---@diagnostic disable-next-line: undefined-field
131vim.opt.rtp:prepend(lazypath)
132
133-- [[ Configure and install plugins ]]
134--
135-- To check the current status of your plugins, run
136-- :Lazy
137--
138-- You can press `?` in this menu for help. Use `:q` to close the window
139--
140-- To update plugins you can run
141-- :Lazy update
142--
143-- NOTE: Here is where you install your plugins.
144require("lazy").setup({
145 -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
146 "tpope/vim-sleuth", -- Detect tabstop and shiftwidth automatically
147
148 -- NOTE: Plugins can also be added by using a table,
149 -- with the first argument being the link and the following
150 -- keys can be used to configure plugin behavior/loading/etc.
151 --
152 -- Use `opts = {}` to force a plugin to be loaded.
153 --
154
155 -- Here is a more advanced example where we pass configuration
156 -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
157 -- require('gitsigns').setup({ ... })
158 --
159 -- See `:help gitsigns` to understand what the configuration keys do
160 { -- Adds git related signs to the gutter, as well as utilities for managing changes
161 "lewis6991/gitsigns.nvim",
162 opts = {
163 signs = {
164 add = { text = "+" },
165 change = { text = "~" },
166 delete = { text = "_" },
167 topdelete = { text = "‾" },
168 changedelete = { text = "~" },
169 },
170 },
171 },
172
173 -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
174 --
175 -- This is often very useful to both group configuration, as well as handle
176 -- lazy loading plugins that don't need to be loaded immediately at startup.
177 --
178 -- For example, in the following configuration, we use:
179 -- event = 'VimEnter'
180 --
181 -- which loads which-key before all the UI elements are loaded. Events can be
182 -- normal autocommands events (`:help autocmd-events`).
183 --
184 -- Then, because we use the `config` key, the configuration only runs
185 -- after the plugin has been loaded:
186 -- config = function() ... end
187
188 { -- Useful plugin to show you pending keybinds.
189 "folke/which-key.nvim",
190 event = "VimEnter", -- Sets the loading event to 'VimEnter'
191 opts = {
192 icons = {
193 -- set icon mappings to true if you have a Nerd Font
194 mappings = vim.g.have_nerd_font,
195 -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
196 -- default whick-key.nvim defined Nerd Font icons, otherwise define a string table
197 keys = vim.g.have_nerd_font and {} or {
198 Up = "<Up> ",
199 Down = "<Down> ",
200 Left = "<Left> ",
201 Right = "<Right> ",
202 C = "<C-…> ",
203 M = "<M-…> ",
204 D = "<D-…> ",
205 S = "<S-…> ",
206 CR = "<CR> ",
207 Esc = "<Esc> ",
208 ScrollWheelDown = "<ScrollWheelDown> ",
209 ScrollWheelUp = "<ScrollWheelUp> ",
210 NL = "<NL> ",
211 BS = "<BS> ",
212 Space = "<Space> ",
213 Tab = "<Tab> ",
214 F1 = "<F1>",
215 F2 = "<F2>",
216 F3 = "<F3>",
217 F4 = "<F4>",
218 F5 = "<F5>",
219 F6 = "<F6>",
220 F7 = "<F7>",
221 F8 = "<F8>",
222 F9 = "<F9>",
223 F10 = "<F10>",
224 F11 = "<F11>",
225 F12 = "<F12>",
226 },
227 },
228
229 -- Document existing key chains
230 spec = {
231 { "<leader>c", group = "[C]ode", mode = { "n", "x" } },
232 { "<leader>d", group = "[D]ocument" },
233 { "<leader>r", group = "[R]ename" },
234 { "<leader>s", group = "[S]earch" },
235 { "<leader>w", group = "[W]orkspace" },
236 { "<leader>t", group = "[T]oggle" },
237 { "<leader>h", group = "Git [H]unk", mode = { "n", "v" } },
238 },
239 },
240 },
241
242 -- NOTE: Plugins can specify dependencies.
243 --
244 -- The dependencies are proper plugin specifications as well - anything
245 -- you do for a plugin at the top level, you can do for a dependency.
246 --
247 -- Use the `dependencies` key to specify the dependencies of a particular plugin
248
249 { -- Fuzzy Finder (files, lsp, etc)
250 "nvim-telescope/telescope.nvim",
251 event = "VimEnter",
252 branch = "0.1.x",
253 dependencies = {
254 "nvim-lua/plenary.nvim",
255 { -- If encountering errors, see telescope-fzf-native README for installation instructions
256 "nvim-telescope/telescope-fzf-native.nvim",
257
258 -- `build` is used to run some command when the plugin is installed/updated.
259 -- This is only run then, not every time Neovim starts up.
260 build = "make",
261
262 -- `cond` is a condition used to determine whether this plugin should be
263 -- installed and loaded.
264 cond = function()
265 return vim.fn.executable("make") == 1
266 end,
267 },
268 { "nvim-telescope/telescope-ui-select.nvim" },
269
270 -- Useful for getting pretty icons, but requires a Nerd Font.
271 { "nvim-tree/nvim-web-devicons", enabled = vim.g.have_nerd_font },
272 },
273 config = function()
274 -- Telescope is a fuzzy finder that comes with a lot of different things that
275 -- it can fuzzy find! It's more than just a "file finder", it can search
276 -- many different aspects of Neovim, your workspace, LSP, and more!
277 --
278 -- The easiest way to use Telescope, is to start by doing something like:
279 -- :Telescope help_tags
280 --
281 -- After running this command, a window will open up and you're able to
282 -- type in the prompt window. You'll see a list of `help_tags` options and
283 -- a corresponding preview of the help.
284 --
285 -- Two important keymaps to use while in Telescope are:
286 -- - Insert mode: <c-/>
287 -- - Normal mode: ?
288 --
289 -- This opens a window that shows you all of the keymaps for the current
290 -- Telescope picker. This is really useful to discover what Telescope can
291 -- do as well as how to actually do it!
292
293 -- [[ Configure Telescope ]]
294 -- See `:help telescope` and `:help telescope.setup()`
295 require("telescope").setup({
296 -- You can put your default mappings / updates / etc. in here
297 -- All the info you're looking for is in `:help telescope.setup()`
298 --
299 -- defaults = {
300 -- mappings = {
301 -- i = { ['<c-enter>'] = 'to_fuzzy_refine' },
302 -- },
303 -- },
304 -- pickers = {}
305 extensions = {
306 ["ui-select"] = {
307 require("telescope.themes").get_dropdown(),
308 },
309 },
310 })
311
312 -- Enable Telescope extensions if they are installed
313 pcall(require("telescope").load_extension, "fzf")
314 pcall(require("telescope").load_extension, "ui-select")
315
316 -- See `:help telescope.builtin`
317 local builtin = require("telescope.builtin")
318 vim.keymap.set("n", "<leader>sh", builtin.help_tags, { desc = "[S]earch [H]elp" })
319 vim.keymap.set("n", "<leader>sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" })
320 vim.keymap.set("n", "<leader>sf", builtin.find_files, { desc = "[S]earch [F]iles" })
321 vim.keymap.set("n", "<leader>ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" })
322 vim.keymap.set("n", "<leader>sw", builtin.grep_string, { desc = "[S]earch current [W]ord" })
323 vim.keymap.set("n", "<leader>sg", builtin.live_grep, { desc = "[S]earch by [G]rep" })
324 vim.keymap.set("n", "<leader>sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" })
325 vim.keymap.set("n", "<leader>sr", builtin.resume, { desc = "[S]earch [R]esume" })
326 vim.keymap.set("n", "<leader>s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
327 vim.keymap.set("n", "<leader><leader>", builtin.buffers, { desc = "[ ] Find existing buffers" })
328
329 -- Slightly advanced example of overriding default behavior and theme
330 vim.keymap.set("n", "<leader>/", function()
331 -- You can pass additional configuration to Telescope to change the theme, layout, etc.
332 builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown({
333 winblend = 10,
334 previewer = false,
335 }))
336 end, { desc = "[/] Fuzzily search in current buffer" })
337
338 -- It's also possible to pass additional configuration options.
339 -- See `:help telescope.builtin.live_grep()` for information about particular keys
340 vim.keymap.set("n", "<leader>s/", function()
341 builtin.live_grep({
342 grep_open_files = true,
343 prompt_title = "Live Grep in Open Files",
344 })
345 end, { desc = "[S]earch [/] in Open Files" })
346
347 -- Shortcut for searching your Neovim configuration files
348 vim.keymap.set("n", "<leader>sn", function()
349 builtin.find_files({ cwd = vim.fn.stdpath("config") })
350 end, { desc = "[S]earch [N]eovim files" })
351 end,
352 },
353
354 -- LSP Plugins
355 {
356 -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
357 -- used for completion, annotations and signatures of Neovim apis
358 "folke/lazydev.nvim",
359 ft = "lua",
360 opts = {
361 library = {
362 -- Load luvit types when the `vim.uv` word is found
363 { path = "luvit-meta/library", words = { "vim%.uv" } },
364 },
365 },
366 },
367 { "Bilal2453/luvit-meta", lazy = true },
368 {
369 -- Main LSP Configuration
370 "neovim/nvim-lspconfig",
371 dependencies = {
372 -- Automatically install LSPs and related tools to stdpath for Neovim
373 { "williamboman/mason.nvim", config = true }, -- NOTE: Must be loaded before dependants
374 "williamboman/mason-lspconfig.nvim",
375 "WhoIsSethDaniel/mason-tool-installer.nvim",
376
377 -- Useful status updates for LSP.
378 -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
379 { "j-hui/fidget.nvim", opts = {} },
380
381 -- Allows extra capabilities provided by nvim-cmp
382 "hrsh7th/cmp-nvim-lsp",
383 },
384 config = function()
385 -- Brief aside: **What is LSP?**
386 --
387 -- LSP is an initialism you've probably heard, but might not understand what it is.
388 --
389 -- LSP stands for Language Server Protocol. It's a protocol that helps editors
390 -- and language tooling communicate in a standardized fashion.
391 --
392 -- In general, you have a "server" which is some tool built to understand a particular
393 -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers
394 -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
395 -- processes that communicate with some "client" - in this case, Neovim!
396 --
397 -- LSP provides Neovim with features like:
398 -- - Go to definition
399 -- - Find references
400 -- - Autocompletion
401 -- - Symbol Search
402 -- - and more!
403 --
404 -- Thus, Language Servers are external tools that must be installed separately from
405 -- Neovim. This is where `mason` and related plugins come into play.
406 --
407 -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
408 -- and elegantly composed help section, `:help lsp-vs-treesitter`
409
410 -- This function gets run when an LSP attaches to a particular buffer.
411 -- That is to say, every time a new file is opened that is associated with
412 -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
413 -- function will be executed to configure the current buffer
414 vim.api.nvim_create_autocmd("LspAttach", {
415 group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }),
416 callback = function(event)
417 -- NOTE: Remember that Lua is a real programming language, and as such it is possible
418 -- to define small helper and utility functions so you don't have to repeat yourself.
419 --
420 -- In this case, we create a function that lets us more easily define mappings specific
421 -- for LSP related items. It sets the mode, buffer and description for us each time.
422 local map = function(keys, func, desc, mode)
423 mode = mode or "n"
424 vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = "LSP: " .. desc })
425 end
426
427 -- Jump to the definition of the word under your cursor.
428 -- This is where a variable was first declared, or where a function is defined, etc.
429 -- To jump back, press <C-t>.
430 map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition")
431
432 -- Find references for the word under your cursor.
433 map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences")
434
435 -- Jump to the implementation of the word under your cursor.
436 -- Useful when your language has ways of declaring types without an actual implementation.
437 map("gI", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation")
438
439 -- Jump to the type of the word under your cursor.
440 -- Useful when you're not sure what type a variable is and you want to see
441 -- the definition of its *type*, not where it was *defined*.
442 map("<leader>D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition")
443
444 -- Fuzzy find all the symbols in your current document.
445 -- Symbols are things like variables, functions, types, etc.
446 map("<leader>ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols")
447
448 -- Fuzzy find all the symbols in your current workspace.
449 -- Similar to document symbols, except searches over your entire project.
450 map(
451 "<leader>ws",
452 require("telescope.builtin").lsp_dynamic_workspace_symbols,
453 "[W]orkspace [S]ymbols"
454 )
455
456 -- Rename the variable under your cursor.
457 -- Most Language Servers support renaming across files, etc.
458 map("<leader>rn", vim.lsp.buf.rename, "[R]e[n]ame")
459
460 -- Execute a code action, usually your cursor needs to be on top of an error
461 -- or a suggestion from your LSP for this to activate.
462 map("<leader>ca", vim.lsp.buf.code_action, "[C]ode [A]ction", { "n", "x" })
463
464 -- WARN: This is not Goto Definition, this is Goto Declaration.
465 -- For example, in C this would take you to the header.
466 map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration")
467
468 -- The following two autocommands are used to highlight references of the
469 -- word under your cursor when your cursor rests there for a little while.
470 -- See `:help CursorHold` for information about when this is executed
471 --
472 -- When you move your cursor, the highlights will be cleared (the second autocommand).
473 local client = vim.lsp.get_client_by_id(event.data.client_id)
474 if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
475 local highlight_augroup =
476 vim.api.nvim_create_augroup("kickstart-lsp-highlight", { clear = false })
477 vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, {
478 buffer = event.buf,
479 group = highlight_augroup,
480 callback = vim.lsp.buf.document_highlight,
481 })
482
483 vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, {
484 buffer = event.buf,
485 group = highlight_augroup,
486 callback = vim.lsp.buf.clear_references,
487 })
488
489 vim.api.nvim_create_autocmd("LspDetach", {
490 group = vim.api.nvim_create_augroup("kickstart-lsp-detach", { clear = true }),
491 callback = function(event2)
492 vim.lsp.buf.clear_references()
493 vim.api.nvim_clear_autocmds({ group = "kickstart-lsp-highlight", buffer = event2.buf })
494 end,
495 })
496 end
497
498 -- The following code creates a keymap to toggle inlay hints in your
499 -- code, if the language server you are using supports them
500 --
501 -- This may be unwanted, since they displace some of your code
502 if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
503 map("<leader>th", function()
504 vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled({ bufnr = event.buf }))
505 end, "[T]oggle Inlay [H]ints")
506 end
507 end,
508 })
509
510 -- LSP servers and clients are able to communicate to each other what features they support.
511 -- By default, Neovim doesn't support everything that is in the LSP specification.
512 -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
513 -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
514 local capabilities = vim.lsp.protocol.make_client_capabilities()
515 capabilities = vim.tbl_deep_extend("force", capabilities, require("cmp_nvim_lsp").default_capabilities())
516
517 -- Enable the following language servers
518 -- Feel free to add/remove any LSPs that you want here. They will automatically be installed.
519 --
520 -- Add any additional override configuration in the following tables. Available keys are:
521 -- - cmd (table): Override the default command used to start the server
522 -- - filetypes (table): Override the default list of associated filetypes for the server
523 -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
524 -- - settings (table): Override the default settings passed when initializing the server.
525 -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
526 local servers = {
527 -- clangd = {},
528 gopls = {},
529 -- pyright = {},
530 -- rust_analyzer = {},
531 -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
532 --
533 -- Some languages (like typescript) have entire language plugins that can be useful:
534 -- https://github.com/pmizio/typescript-tools.nvim
535 --
536 -- But for many setups, the LSP (`ts_ls`) will work just fine
537 -- ts_ls = {},
538 --
539
540 lua_ls = {
541 -- cmd = {...},
542 -- filetypes = { ...},
543 -- capabilities = {},
544 settings = {
545 Lua = {
546 completion = {
547 callSnippet = "Replace",
548 },
549 -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
550 -- diagnostics = { disable = { 'missing-fields' } },
551 },
552 },
553 },
554 }
555
556 -- Ensure the servers and tools above are installed
557 -- To check the current status of installed tools and/or manually install
558 -- other tools, you can run
559 -- :Mason
560 --
561 -- You can press `g?` for help in this menu.
562 require("mason").setup()
563
564 -- You can add other tools here that you want Mason to install
565 -- for you, so that they are available from within Neovim.
566 local ensure_installed = vim.tbl_keys(servers or {})
567 vim.list_extend(ensure_installed, {
568 "stylua", -- Used to format Lua code
569 })
570 require("mason-tool-installer").setup({ ensure_installed = ensure_installed })
571
572 require("mason-lspconfig").setup({
573 handlers = {
574 function(server_name)
575 local server = servers[server_name] or {}
576 -- This handles overriding only values explicitly passed
577 -- by the server configuration above. Useful when disabling
578 -- certain features of an LSP (for example, turning off formatting for ts_ls)
579 server.capabilities = vim.tbl_deep_extend("force", {}, capabilities, server.capabilities or {})
580 require("lspconfig")[server_name].setup(server)
581 end,
582 },
583 })
584 end,
585 },
586
587 { -- Autoformat
588 "stevearc/conform.nvim",
589 event = { "BufWritePre" },
590 cmd = { "ConformInfo" },
591 keys = {
592 {
593 "<leader>f",
594 function()
595 require("conform").format({ async = true, lsp_format = "fallback" })
596 end,
597 mode = "",
598 desc = "[F]ormat buffer",
599 },
600 },
601 opts = {
602 notify_on_error = false,
603 format_on_save = function(bufnr)
604 -- Disable "format_on_save lsp_fallback" for languages that don't
605 -- have a well standardized coding style. You can add additional
606 -- languages here or re-enable it for the disabled ones.
607 local disable_filetypes = { c = true, cpp = true }
608 local lsp_format_opt
609 if disable_filetypes[vim.bo[bufnr].filetype] then
610 lsp_format_opt = "never"
611 else
612 lsp_format_opt = "fallback"
613 end
614 return {
615 timeout_ms = 500,
616 lsp_format = lsp_format_opt,
617 }
618 end,
619 formatters_by_ft = {
620 lua = { "stylua" },
621 -- Conform can also run multiple formatters sequentially
622 -- python = { "isort", "black" },
623 --
624 -- You can use 'stop_after_first' to run the first available formatter from the list
625 -- javascript = { "prettierd", "prettier", stop_after_first = true },
626 },
627 },
628 },
629
630 { -- Autocompletion
631 "hrsh7th/nvim-cmp",
632 event = "InsertEnter",
633 dependencies = {
634 -- Snippet Engine & its associated nvim-cmp source
635 {
636 "L3MON4D3/LuaSnip",
637 build = (function()
638 -- Build Step is needed for regex support in snippets.
639 -- This step is not supported in many windows environments.
640 -- Remove the below condition to re-enable on windows.
641 if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then
642 return
643 end
644 return "make install_jsregexp"
645 end)(),
646 dependencies = {
647 -- `friendly-snippets` contains a variety of premade snippets.
648 -- See the README about individual language/framework/plugin snippets:
649 -- https://github.com/rafamadriz/friendly-snippets
650 -- {
651 -- 'rafamadriz/friendly-snippets',
652 -- config = function()
653 -- require('luasnip.loaders.from_vscode').lazy_load()
654 -- end,
655 -- },
656 },
657 },
658 "saadparwaiz1/cmp_luasnip",
659
660 -- Adds other completion capabilities.
661 -- nvim-cmp does not ship with all sources by default. They are split
662 -- into multiple repos for maintenance purposes.
663 "hrsh7th/cmp-nvim-lsp",
664 "hrsh7th/cmp-path",
665 },
666 config = function()
667 -- See `:help cmp`
668 local cmp = require("cmp")
669 local luasnip = require("luasnip")
670 luasnip.config.setup({})
671
672 cmp.setup({
673 snippet = {
674 expand = function(args)
675 luasnip.lsp_expand(args.body)
676 end,
677 },
678 completion = { completeopt = "menu,menuone,noinsert" },
679
680 -- For an understanding of why these mappings were
681 -- chosen, you will need to read `:help ins-completion`
682 --
683 -- No, but seriously. Please read `:help ins-completion`, it is really good!
684 mapping = cmp.mapping.preset.insert({
685 -- Select the [n]ext item
686 ["<C-n>"] = cmp.mapping.select_next_item(),
687 -- Select the [p]revious item
688 ["<C-p>"] = cmp.mapping.select_prev_item(),
689
690 -- Scroll the documentation window [b]ack / [f]orward
691 ["<C-b>"] = cmp.mapping.scroll_docs(-4),
692 ["<C-f>"] = cmp.mapping.scroll_docs(4),
693
694 -- Accept ([y]es) the completion.
695 -- This will auto-import if your LSP supports it.
696 -- This will expand snippets if the LSP sent a snippet.
697 ["<C-y>"] = cmp.mapping.confirm({ select = true }),
698
699 -- If you prefer more traditional completion keymaps,
700 -- you can uncomment the following lines
701 --['<CR>'] = cmp.mapping.confirm { select = true },
702 --['<Tab>'] = cmp.mapping.select_next_item(),
703 --['<S-Tab>'] = cmp.mapping.select_prev_item(),
704
705 -- Manually trigger a completion from nvim-cmp.
706 -- Generally you don't need this, because nvim-cmp will display
707 -- completions whenever it has completion options available.
708 ["<C-Space>"] = cmp.mapping.complete({}),
709
710 -- Think of <c-l> as moving to the right of your snippet expansion.
711 -- So if you have a snippet that's like:
712 -- function $name($args)
713 -- $body
714 -- end
715 --
716 -- <c-l> will move you to the right of each of the expansion locations.
717 -- <c-h> is similar, except moving you backwards.
718 ["<C-l>"] = cmp.mapping(function()
719 if luasnip.expand_or_locally_jumpable() then
720 luasnip.expand_or_jump()
721 end
722 end, { "i", "s" }),
723 ["<C-h>"] = cmp.mapping(function()
724 if luasnip.locally_jumpable(-1) then
725 luasnip.jump(-1)
726 end
727 end, { "i", "s" }),
728
729 -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
730 -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
731 }),
732 sources = {
733 {
734 name = "lazydev",
735 -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
736 group_index = 0,
737 },
738 { name = "nvim_lsp" },
739 { name = "luasnip" },
740 { name = "path" },
741 },
742 })
743 end,
744 },
745
746 { -- You can easily change to a different colorscheme.
747 -- Change the name of the colorscheme plugin below, and then
748 -- change the command in the config to whatever the name of that colorscheme is.
749 --
750 -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
751 "folke/tokyonight.nvim",
752 priority = 1000, -- Make sure to load this before all the other start plugins.
753 init = function()
754 -- Load the colorscheme here.
755 -- Like many other themes, this one has different styles, and you could load
756 -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
757 vim.cmd.colorscheme("tokyonight-night")
758
759 -- You can configure highlights by doing something like:
760 vim.cmd.hi("Comment gui=none")
761 end,
762 },
763
764 -- Highlight todo, notes, etc in comments
765 {
766 "folke/todo-comments.nvim",
767 event = "VimEnter",
768 dependencies = { "nvim-lua/plenary.nvim" },
769 opts = { signs = false },
770 },
771
772 { -- Collection of various small independent plugins/modules
773 "echasnovski/mini.nvim",
774 config = function()
775 -- Better Around/Inside textobjects
776 --
777 -- Examples:
778 -- - va) - [V]isually select [A]round [)]paren
779 -- - yinq - [Y]ank [I]nside [N]ext [Q]uote
780 -- - ci' - [C]hange [I]nside [']quote
781 require("mini.ai").setup({ n_lines = 500 })
782
783 -- Add/delete/replace surroundings (brackets, quotes, etc.)
784 --
785 -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
786 -- - sd' - [S]urround [D]elete [']quotes
787 -- - sr)' - [S]urround [R]eplace [)] [']
788 require("mini.surround").setup()
789
790 -- Simple and easy statusline.
791 -- You could remove this setup call if you don't like it,
792 -- and try some other statusline plugin
793 local statusline = require("mini.statusline")
794 -- set use_icons to true if you have a Nerd Font
795 statusline.setup({ use_icons = vim.g.have_nerd_font })
796
797 -- You can configure sections in the statusline by overriding their
798 -- default behavior. For example, here we set the section for
799 -- cursor location to LINE:COLUMN
800 ---@diagnostic disable-next-line: duplicate-set-field
801 statusline.section_location = function()
802 return "%2l:%-2v"
803 end
804
805 -- ... and there is more!
806 -- Check out: https://github.com/echasnovski/mini.nvim
807 end,
808 },
809 { -- Highlight, edit, and navigate code
810 "nvim-treesitter/nvim-treesitter",
811 build = ":TSUpdate",
812 main = "nvim-treesitter.configs", -- Sets main module to use for opts
813 -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
814 opts = {
815 ensure_installed = {
816 "bash",
817 "c",
818 "diff",
819 "go",
820 "html",
821 "lua",
822 "luadoc",
823 "markdown",
824 "markdown_inline",
825 "query",
826 "vim",
827 "vimdoc",
828 "yaml",
829 },
830 -- Autoinstall languages that are not installed
831 auto_install = true,
832 highlight = {
833 enable = true,
834 -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
835 -- If you are experiencing weird indenting issues, add the language to
836 -- the list of additional_vim_regex_highlighting and disabled languages for indent.
837 additional_vim_regex_highlighting = { "ruby" },
838 },
839 indent = { enable = true, disable = { "ruby" } },
840 },
841 -- There are additional nvim-treesitter modules that you can use to interact
842 -- with nvim-treesitter. You should go explore a few and see what interests you:
843 --
844 -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
845 -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
846 -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
847 },
848
849 -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
850 -- init.lua. If you want these files, they are in the repository, so you can just download them and
851 -- place them in the correct locations.
852
853 -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
854 --
855 -- Here are some example plugins that I've included in the Kickstart repository.
856 -- Uncomment any of the lines below to enable them (you will need to restart nvim).
857 --
858 -- require 'kickstart.plugins.debug',
859 -- require 'kickstart.plugins.indent_line',
860 -- require 'kickstart.plugins.lint',
861 -- require 'kickstart.plugins.autopairs',
862 -- require 'kickstart.plugins.neo-tree',
863 -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
864
865 -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
866 -- This is the easiest way to modularize your config.
867 --
868 -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
869 -- For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
870 -- { import = 'custom.plugins' },
871}, {
872 ui = {
873 -- If you are using a Nerd Font: set icons to an empty table which will use the
874 -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
875 icons = vim.g.have_nerd_font and {} or {
876 cmd = "⌘",
877 config = "🛠",
878 event = "📅",
879 ft = "📂",
880 init = "⚙",
881 keys = "🗝",
882 plugin = "🔌",
883 runtime = "💻",
884 require = "🌙",
885 source = "📄",
886 start = "🚀",
887 task = "📌",
888 lazy = "💤 ",
889 },
890 },
891})
892
893-- The line beneath this is called `modeline`. See `:help modeline`
894-- vim: ts=2 sts=2 sw=2 et